RUUD PACKAGE UNITS

ACHIEVER SERIES: PACKAGE DUAL FUEL

The Package Dual Fuel Unit . The Scroll® Compressor. All of our residential package units – regardless of efficiency level – feature the Scroll Compressor. The scroll compressor uses a more advanced technology than traditional reciprocating compressors. They have fewer moving parts, and they are quieter, more efficient, and longer lasting.

Durable Cabinet with Louvered Condenser Compartment. Our cabinets have a painted finish that protects them from the harshest weather extremes. And our louvered condenser compartment is the best in the industry for protecting the condenser coil against yard hazards and weather extremes.

Grille/Fan Motor Mount. Our motor mount helps protect the fan motor from the elements for longer life. Its design dependability helps reduce vibration and noise.

Furnace Compartment. Located inside the easily accessible furnace compartment is the control box, draft inducer motor, in-shot gas burners, the gas valve and manifold. Control box operational controls are “up front” for quick access and service diagnostics. The draft inducer motor is specially designed to quietly provide combustion air while simultaneously venting outdoors the combustion products from the furnace heat exchanger. In addition to the draft inducer motor, the in-shot gas burners, gas valve and manifold efficiently regulate the flow of gas for combustion. These new Package Dual Fuel Units also feature direct-spark ignition and remote flame sensors for added dependability and efficiency.

Matched Blower/Evaporator Coil Unit. The blower is responsible for the flow of air into your ductwork. It has been designed to match the evaporator coil and other system components for maximum efficiency and quiet operation. In addition, the coil features rifled copper tubing and enhanced fins for improved efficiency.

Tubular Heat Exchanger. Our new Package Dual Fuel Units feature a tubular stainless steel heat exchanger design. Tubular heat exchangers are more efficient and durable than older-style clamshell heat exchangers. The factory standard stainless steel heat exchanger is backed by a limited lifetime warranty in residential applications.

Service Fittings. Exterior service fittings enable a serviceman to quickly determine unit operating conditions.

PACKAGE DEDICATED HORIZONTAL HEAT PUMP

The 2-5 ton Ruud 14 SEER RQPM & 15/16 SEER RQRM Dedicated Horizontal Package Heat Pump units feature earth-friendly R-410A refrigerant. This platform provides you with a full line of capacities that are each AHRI-certified. 

Additional Benefits

The Scroll® Compressor. All of our residential package units, regardless of efficiency level, feature the Scroll Compressor. These scroll compressors use a more advanced technology than traditional reciprocating compressors. The compressor is hermetically sealed and incorporates internal high temperature motor overload protection and durable insulation on the motor windings. The RQRM- A060 uses a two stage scroll compressor. It is externally mounted on rubber grommets to reduce vibration and noise. They have fewer moving parts, and they are quieter, more efficient, and longer lasting, and quiet operation.

Durable Cabinet with Louvered Condenser Compartment. Our cabinets have a powder painted finish that protects them from the harshest weather extremes. And our louvered condenser compartment is the best in the industry for protecting the condenser coil against yard hazards and weather extremes. There is a One-piece top with a drip lip to help keep water off of the unit sides. Supply and return air openings feature a one-inch tall flange to prevent water migration into the ductwork. Access panels have “weep holes” and channels to further help manage water run-off. Easily accessible blower section complete with slide-out blower. Refrigerant connections are conveniently located for easy service diagnostics. Low pressure/loss of charge protection is standard on all models.

Grille/Fan Motor Mount. Our mount helps protect the fan motor from the elements for longer life. Its design dependability helps reduce vibration and noise.

Easily Accessible Control Box. Operational controls are “up front” for quick installation and easy service diagnostics.

Matched Blower/Evaporator Coil Unit. The blower is responsible for the flow of air into your duct work. It has been designed to match the MultiFlex® evaporator coil and other system components for maximum efficiency and quiet operation. In addition, the coil features rifled copper tubing and enhanced fins for improved efficiency.

Service Fittings. Exterior service fittings enable a serviceman to quickly determine unit operating conditions.

Supplemental Electric Heating Strips. Supplemental electric heat strips up to 20 kW are available (field or factory installed) for periods of extreme cold temperatures. Single point wiring simplifies installation.

Other Benefits

  • Package heat pump utilizes demand defrost control which monitors the outdoor ambient temperature, outdoor coil temperature, and compressor run-time to determine when a defrost cycle is required.

  • Rugged base rails included for improved installation and handling.

  • Low pressure control standard on all models.

  • High pressure control standard on all 5ton models.

ACHIEVER SERIES: PACKAGE HEAT PUMP

The 2-4 ton Ruud 14 SEER RQPL, Package Heat Pump units feature earth-friendly R-410A refrigerant. This platform provides you with a full line of capacities that are each AHRI-certified. 

Additional Benefits

The Scroll® Compressor. All of our residential package units, regardless of efficiency level, feature the Scroll Compressor. These scroll compressors use a more advanced technology than traditional reciprocating compressors. The compressor is hermetically sealed and incorporates internal high temperature motor overload protection and durable insulation on the motor windings. It is externally mounted on rubber grommets to reduce vibration and noise. They have fewer moving parts, and they are quieter, more efficient, and longer lasting, and quiet operation.

Durable Cabinet with Louvered Condenser Compartment. Our cabinets have a painted finish that protects them from the harshest weather extremes. And our louvered condenser compartment is the best in the industry for protecting the condenser coil against yard hazards and weather extremes. There is a One-piece top with a drip lip to help keep water off of the unit sides. Supply and return air openings feature a one-inch tall flange to prevent water migration into the ductwork. Access panels have “weep holes” and channels to further help manage water run-off. Side and down discharge options available on all models. Easily accessible blower section complete with slide-out blower. Refrigerant connections are conveniently located for easy service diagnostics. Low pressure/loss of charge protection is standard on all models.

Grille/Fan Motor Mount. Our mount helps protect the fan motor from the elements for longer life. Its design dependability helps reduce vibration and noise.

Easily Accessible Control Box. Operational controls are “up front” for quick installation and easy service diagnostics.

Matched Blower/Evaporator Coil Unit. The blower is responsible for the flow of air into your duct work. It has been designed to match the MultiFlex® evaporator coil and other system components for maximum efficiency and quiet operation. In addition, the coil features rifled copper tubing and enhanced fins for improved efficiency.

Service Fittings. Exterior service fittings enable a serviceman to quickly determine unit operating conditions.

Supplemental Electric Heating Strips. Supplemental electric heat strips up to 15 kW are available (field or factory installed) for periods of extreme cold temperatures. Single point wiring simplifies installation.

Other Benefits

  • All units feature an internal trap on the condensate line eliminating the need for installing an on-site external trap.

  • Package heat pump utilizes demand defrost control which monitors the outdoor ambient temperature, outdoor coil temperature, and compressor run-time to determine when a defrost cycle is required.

  • Thermal expansion valves are standard on all models for superior super heat control, reliability, and energy efficiency at all operating conditions.

  • Filter drier standard on all models (not shown).

  • Rugged base rails included for improved installation and handling.

ULTRA SERIES: PACKAGE GAS/ELECTRIC (2-5 TON)

  • All models feature Scroll® compressors for maximum efficiency and quiet operation. 5 Ton RGEA16 models feature UltraTech™ Scroll 2-Stage compressors with Comfort Alert™ diagnostics (see below), high/low pressure switches, and hard start kits.

  • Louvered condenser compartment for protecting the coil against yard hazards and/or weather extremes.

  • One-piece top with a deep flange to help keep water out of the unit.

  • Supply and return air openings feature a one-inch tall flange to prevent water migration into the ductwork.

  • Access panels have “weep holes” and channels to further help manage water run-off.

  • Side and down discharge options available on all models. All models are shipped ready for horizontal application.

  • Easily accessible blower section complete with slide-out blower. The RGEA16 comes standard with variable speed motor with adjustable airflow in heating and cooling. The variable speed motor also comes with a interface that allows for dehumidification when used in continuous humidistat. The variable speed system is capable of 1 inch external static.

  • Refrigerant connections are conveniently located for easy service diagnostics.

  • Condenser and evaporator coils feature enhanced fins for better heat transfer and rifled copper tubing for greater efficiency.

  • Inside the easily accessible furnace compartment is the draft inducer motor. This motor is specially designed for quiet reliable operation. In addition to the draft inducer motor, the in-shot gas burners and manifold efficiently regulate the flow of gas for combustion. These new gas/electric units also feature direct-spark ignition and remote flame sensors for added reliability and efficiency.

  • All units feature an internal trap on the condensate line eliminating the need for installing an on-site external trap.

  • Easily accessible control box.

  • Single point wiring simplifies installation.

  • Our gas/electric package units feature a tubular heat exchanger design. Tubular heat exchangers are more efficient and durable than older-style clamshell heat exchangers. Stainless Steel Heat Exchanger is a standard feature on the RGEA16 and is backed by a limited lifetime warranty when installed in a residential application, and a 20 year warranty when installed in a commercial application. Two stage gas heat is standard on the RGEA16 models.

  • Thermal expansion valve standard on all models for superior super heat control, reliability, and energy efficiency at all operating conditions.

  • Filter drier standard on all models (not shown).

  • Rugged baserail included for improved installation and handling

  • Complete factory charged, wired and run tested.

  • Molded compressor plugs.